Hipcam Default Login Jun 2026

Find your camera’s IP address by checking your Wi-Fi router’s connected devices list (look for "Hipcam" or the camera's MAC address).

The table below provides a quick reference for the default settings you'll need to access your Hipcam camera.

After you've made your initial adjustments, go through this final checklist to ensure your Hipcam camera is as secure as possible:

With the camera plugged in, press and hold the reset button for 15–30 seconds . The camera should reboot.

admin Password: 123456

If you are using the Hipcam mobile app, the login credentials are not the same as the camera's internal web interface. The app requires an account created during initial setup.

To use these credentials, you need to access the camera’s internal web management page via a web browser.

Look at the bottom or back of the camera body. Safe credentials or a setup PIN are often printed next to the serial number and MAC address.

For almost all Hipcam products (including the popular “Hipcam Pro” and generic IP camera models running Hipcam firmware), the factory settings are universal. hipcam default login

Check the physical booklet that came in the box.

If using the Hipcam app, enable 2FA in your account settings. This requires a secondary code sent to your phone before anyone can log in.

If you are trying to connect your camera to third-party software (like

After it restarts, try logging in with admin/admin or admin/ (blank password). 2. Check the Product Label Find your camera’s IP address by checking your

Make sure your Hipcam is connected to your router via Ethernet or Wi-Fi.

If the camera is already linked, tap on the device thumbnail from your dashboard to view the live feed and access settings. Method B: Through a Web Browser (Legacy Devices)

Resetting the camera wipes all custom settings and restores the original factory default login info.

If you have recently acquired a Hipcam device or performed a factory reset, you will need the default administrative credentials to access the camera's web interface or mobile application. This guide provides the standard login details and troubleshooting steps for access issues. The camera should reboot