The configuration dictating the startup state of the device is set to connect at power-on, but the resource is unavailable.
serial0.present = "TRUE" serial0.fileType = "device" serial0.fileName = "COM1" serial0.startConnected = "TRUE" Use code with caution.
The “Virtual device serial0 will start disconnected” message is a common informational warning that appears in various VMware products. It is not an indication of VM corruption or permanent failure, but rather a notification that the VM’s virtual COM port was unable to establish a connection during startup. virtual device serial0 will start disconnected
. Unless your workflow specifically requires a serial console or virtual printing, you can typically dismiss the message and the VM will function normally. for editing the file on your specific operating system? Virtualization Architect Technical Support Engineer
in the vCenter Server's advanced settings can help maintain connections. Impact on Operations In most cases, this message is a non-critical warning The configuration dictating the startup state of the
If you add a serial port to a VM but do not specify what it connects to (e.g., a physical COM port, a file, a named pipe, or an output to a printer), VMware will default to disconnecting it. The device is present but inactive.
When a virtual machine boots, the hypervisor reviews the configuration file (the .vmx file) and attempts to initialize all listed hardware components. It is not an indication of VM corruption
Change to:
This is very common for network emulation users. GNS3 often links virtual routers to VMware VMs via named pipes for console access.
A: The same rule applies. Each disconnected port will log a separate warning.