Becsys5 Installation And Technical Manual -

All plumbing and electrical work must comply with local, state, and national codes.

Navigate to . Accept the 7.0 buffer value once the onscreen reading stabilizes.

Proper mechanical installation prevents data drift and protects delicate internal sensors from dynamic line surges. Enclosure Mounting Constraints

Clean sensors regularly to maintain accuracy. Electrolyte levels in membrane caps must be checked.

+---------------------------------------------------+ | BECSys5 Main Controller | +---------------------------------------------------+ | | | [AC Line Input] [Solid-State Relays] [Low-Voltage Signals] 115 / 230 VAC Jumper Selectable: 4-20mA / MODBUS (Dedicated Circuit) Line Volt / Dry Contact (BMS Interfacing) becsys5 installation and technical manual

The BECSys5 features dry-contact and powered relays. Ensure that the total current draw of connected chemical feed pumps does not exceed the internal fuse ratings. Use external contactors or motor starters for heavy electrical loads such as large commercial erosion feeders or high-draw salt chlorination cells. 4. System Commissioning and Startup Sequence

The BECSys5 is highly configurable and supports a wide range of analog and digital inputs. These inputs include various options such as pH, ORP, temperature, conductivity/TDS, flow rate, turbidity, surge pit level, filter pressures, and strainer vacuum.

: The controller features an internal safety shield to prevent accidental contact with high-voltage circuitry during tasks like fuse replacement. Core Technical Specifications Resolution pH 0 to 14 pH 0.1 or 0.01 units ORP -1000 to +1000 mV Temperature 32 to 150 °F (0 to 66 °C) 1 °F or °C PPM (Optional) 0 to 20 ppm 0.1 or 0.01 ppm Operational Highlights

Example for an AHU supply air temperature sensor: All plumbing and electrical work must comply with

Proper installation is critical for the long-term performance and accuracy of the system. This guide, based on the , walks through the essential installation steps, technical specifications, and maintenance requirements. 1. Pre-Installation and Safety Guidelines Before beginning, it is vital to read the manual fully.

: Capable of tracking Total Alkalinity (TA), Free/Total Chlorine (PPM), Turbidity, and even TDS (Total Dissolved Solids). Safety Features :

From the main menu, press the 'Menu' button and select 'Control Outputs'. The system allows you to set up multiple control types, including:

Ensure the following components are pre-installed: Free/Total Chlorine (PPM)

BECSys5 uses a hardware-locked license via a USB dongle (Sentinel HASP).

: Includes VFD control technology and Total Dynamic Head (TDH) monitoring to optimize circulation pump efficiency.

: Up to 15 additional relays (total 19-24) using SRX or MRX modules. Input Capabilities Standard Probes