Commax Dpra01 Installation Manual Link · Complete

Attach the mounting bracket firmly to the wall using the provided screws.

Ensure you haven't exceeded the 100-meter maximum distance limit, or upgrade to a thicker gauge copper wire (0.8mm or 1.0mm) to reduce signal attenuation.

: Connect the dedicated door release terminals from the master handset directly to your electronic door kit or electric strike plate. commax dpra01 installation manual link

When a visitor presses the button on the Door Station (e.g., DR-2K), a chime sounds on the Go to product viewer dialog for this item. Talking: Lift the handset to talk with the visitor.

The DP-RA01 kit typically consists of two indoor handsets (a Master and a Slave) and one outdoor door station (often the or DR-201D ). Key Features : Attach the mounting bracket firmly to the wall

Since it is non-polar, the order of the two wires does not matter, which prevents damage during installation. 2. Connection Diagram

The most reliable is often found on the official support page: When a visitor presses the button on the Door Station (e

Verify that the auxiliary power supply driving the electronic door strike is plugged in and providing the correct amperage.

The total between your indoor handset and the outside door

You might find “universal video door phone wiring guides” online, but the exists for a reason: unique wiring pinouts and voltage requirements. Using a generic guide can lead to: