Kirisun Pt8100 Programming Software Portable -

Ensure the correct USB-to-serial drivers (often Prolific or CH341) are installed to establish a stable COM port connection.

: Once modifications are complete, click "Write" to upload the new settings. Do not disconnect the cable until the progress bar reaches 100%. Troubleshooting Common Issues Kirisun Programming Software Pt8100 12 1 - Facebook

Getting the software up and running requires installing both the USB cable drivers and the Kirisun Customer Programming Software (CPS). Step 1: Install the USB Cable Drivers

You will need a compatible programming cable for the PT8100. This cable connects the radio's RJ45 port to your PC's USB port. kirisun pt8100 programming software

Under Menu Setting > Squelch , you have levels 0 (open) to 9 (tight). Default is 5. In high-RF interference areas (near cellular towers), increase to 7 or 8.

In the Kirisun software menu, click on > Communication Port .

Choose between Wide (25 kHz) or Narrow (12.5 kHz). Most modern commercial frequencies require Narrowband compliance. Ensure the correct USB-to-serial drivers (often Prolific or

Because the PT8100 is an older model (discontinued in many markets), you may need to turn to radio enthusiast forums like RadioReference.com , CommunicationsSupport.co.uk , or HamRadioIndia . The typical filename you are looking for is:

Configures selective calling, radio stun/kill features, and ANI (Automatic Number Identification) for dispatch systems. 6. Troubleshooting Common Software Errors

Check that the cable is firmly connected and that you have selected the correct COM port in the software. Under Menu Setting > Squelch , you have

Extract the files to a dedicated folder on your local drive.

Connect the programming cable to your computer and the front microphone port of the PT8100. Turn the radio power switch on.

Once finished, click Write or Write to Radio to save the new configuration.