Bmp280 — Proteus Library

Place 4.7kΩ pull-up resistors on both the SDA and SCL lines to ensure stable simulation signals.

“The hardware part uses Proteus to build a simplified weather station, with BMP280 module (I2C) for pressure and air quality. LabVIEW creates the monitoring interface with radar maps for real‑time wind direction and waveform charts for historical data curves”.

Double-click the Arduino board in your simulation and select your .HEX file in the "Program File" field. bmp280 proteus library

Since Proteus cannot read raw .ino sketches, you must compile the code into a binary format. In the Arduino IDE, go to -> Export Compiled Binary . This creates a .hex file in your project directory. Running and Debugging the Simulation

A very specific topic!

Because Proteus lacks a built-in BMP280 model, engineering communities have created custom simulation blocks. Step-by-Step Download Instructions

If you want, I can:

Note: In Proteus, ensure the BMP280 is correctly powered. Because BMP280 is a sensor, it is critical not to feed to the VIN pin. 3. Programming the Arduino for Proteus