This website is ment to be used on desktop only
EN 13782 is often mentioned alongside , which is a mandatory regulation for the sale of steel and aluminum structures on the EU market. EN 1090 covers the manufacturing process of steel and aluminum structures, including factory production control, welding quality, and the bearing capacity of each component. For temporary tents that incorporate steel or aluminum frames, both EN 13782 and EN 1090 apply. EN 13782 addresses the overall safety and performance of the temporary structure, while EN 1090 ensures the quality and conformity of the metallic components used. Together, these standards provide a complete safety framework for metal‑framed temporary tents.
Specifications for emergency escape routes, unobstructed exits, and the use of heating or electrical equipment within the tent are included. The "Tent Book" and Documentation
Safety Under the Big Top: Understanding the EN 13782 Standard
EN 13782 sets specific requirements for the technical textiles used in tent membranes. It covers the selection of materials and the design of connections. The cutting pattern of the membrane must strictly align with the structural calculation to ensure that pre-stressing loads are properly considered. en 13782 pdf
specific structural calculation requirements for wind or snow.
The layout must include clearly marked emergency exits proportional to the expected occupant capacity. Digital Management: Utilizing EN 13782 PDF Files
Records of annual or periodic checks by independent safety bodies (like TÜV or equivalent national organizations). How to Access the EN 13782 PDF legally EN 13782 is often mentioned alongside , which
, which superseded the older 2005 version to align with modern structural safety expectations. iTeh Standards Core Safety Requirements
As of , a draft revision of the standard is under development. The draft document, designated prEN 13782:2025 or EN 13782:2025 Ontw. , has been published by national standards bodies such as NEN (Netherlands), DIN (Germany), and ÖNORM (Austria). The draft is expected to supersede the 2015 version and is currently available in draft form for public comment and early adoption. The 2025 draft contains 41 to 48 pages (depending on the national edition) and is available in both German and English. It is crucial for stakeholders to note that the 2025 version is currently a draft, and the 2015 edition remains the official standard until the revision is formally approved and published.
For public events, the layout of the tent must facilitate rapid evacuation: Minimum widths for exit routes based on occupant capacity. Clear positioning of exit signs and emergency lighting. EN 13782 addresses the overall safety and performance
A competent person must inspect the structure after every installation to verify that anchoring, bracing, and fabric tension match the engineering drawings.
: Primarily applies to tents with a ground area greater than 50 m² . For groups of smaller tents that collectively exceed this area, the standard also applies.
: It dictates safety requirements across the entire lifecycle, including
A standard EN 13782 PDF document details stringent engineering principles tailored to the temporary nature of tents. The primary focus areas include: 1. Wind Load Calculations
However, here are your :