Sinotimer — Svp-916 Manual Pdf

Illuminates when the incoming voltage drops below the programmed floor threshold.

The SVP-916 is a multi-function digital timer switch, commonly used for:

Connect the main incoming Live/Phase wire to the terminal. Sinotimer Svp-916 Manual Pdf

The SVP-916 is designed for easy installation within a standard household distribution box. Wiring Steps: Mounting: Snap the device onto a 35mm DIN rail.

To enter the setting mode, press and hold the button for 3 seconds. Use the Up/Down arrows to adjust values. Function Description P01 Power-on Delay Time 1 – 500 seconds P02 Over-voltage Protection Value 221V – 300V – OFF P03 Over-voltage Recovery Value 220V – 299V P04 Over-voltage Protection Action Time 0.1s – 10s P05 Under-voltage Protection Value 150V – 219V – OFF P06 Under-voltage Recovery Value 151V – 220V P07 Under-voltage Protection Action Time 0.1s – 10s P08 Over-current Protection Value 1A – 63A/80A – OFF P09 Over-current Action Time 0.1s – 30s P10 Fault Recovery Delay Time 2s – 120s P11 Reset Mode AU (Auto) / HA (Manual) P12 Fault Inquiry (Last 5 records) UL (Under), UH (Over), IH (Current) P13 Finish and Exit Operational Notes Illuminates when the incoming voltage drops below the

According to the SVP-916 Instruction Manual and Sinotimer manufacturer data , the device operates under the following parameters: 230V AC, 50/60Hz. Rated Current Options: 40A, 63A, or 80A (model dependent). Power Consumption: ≤ 2W. Mechanical Life: ≥ 4,000 operations. Installation: 35mm standard DIN rail mount.

How long the voltage must be faulty before the device cuts power (0.1 - 30 seconds). 4. Setting the Device to Factory Defaults Wiring Steps: Mounting: Snap the device onto a 35mm DIN rail

Press SET repeatedly to cycle through parameters (e.g., P01 for over-voltage, P04 for under-voltage).

Press and hold the button for 3 seconds to enter the configuration mode. Press the Up (▲) or Down (▼) keys to change the values.