This step will reduce your system's security. Only proceed if you understand the risks.
If you plug your Driving Force GT into a Windows 11 PC, Windows will likely recognize it as a generic USB input device, or the modern software will completely ignore it.
If the wheel lacks force feedback and is misidentified, Windows 11 has applied its default generic driver.
How to Install Logitech Driving Force GT Drivers on Windows 11 The Logitech Driving Force GT Go to product viewer dialog for this item.
The file is approximately 15MB. You can verify the file's integrity if needed; the MD5 checksum for the 64-bit version is 6b07168cdb643fb7ad7661939944d490 . logitech driving force gt drivers windows 11
Open your and click on Settings (or press Windows Key + I ).
When the installer prompts you to plug in your controller, connect the USB cable directly to a motherboard port (preferably a USB 2.0 port, as USB 3.0 or 3.1 ports can occasionally cause detection issues).
Connect the steering wheel's power adapter to a wall outlet, then plug the USB cable directly into a on your PC (black port). Avoid USB 3.0 or 3.1 ports (blue/red), as older legacy firmware occasionally conflicts with newer USB controller protocols.
When Windows 11 launched, it came with a security feature called Core Isolation or Memory Integrity enabled by default. This feature uses hardware virtualization to protect your system from malicious code. However, the old Logitech driver (version 5.10.127) is incompatible with this security feature, causing it to be blocked. This step will reduce your system's security
Even with the correct drivers, the DFGT is finicky on Windows 11. Here are the most common problems and fixes.
After the restart (driver signature enforcement is back on, but the driver is already installed):
Function: Enables Profiler, FFB settings, and 900° rotation How to Install Driving Force GT Drivers on Windows 11 Disconnect your wheel from the PC.
The Logitech Gaming Software (often called the Profiler) allows you to create game-specific profiles. Common settings for most racing simulators, like Assetto Corsa, are: If the wheel lacks force feedback and is
Once installed, open the "Logitech Profiler" app. This is where you unlock the wheel's full potential:
Set this between 100% and 107% . Setting it to 107% uniquely flattens out the "dead zone" in the center of the force feedback delivery on older Logitech gear. Troubleshooting Common Windows 11 Issues The Wheel is Detected as "Driving Force" (Missing "GT")
Right-click any grayed-out or flagged entries labeled Logitech , Driving Force , or Unknown USB Device and choose .
I can provide custom troubleshooting or specific force feedback settings for your game. Share public link