The program's primary use is to initialize (reset to 0%) the waste ink counters, which clearing the blinking red light error. Maintenance Features:
The printer is on but will not feed paper or print. How to Use the Adjustment Program Epson 1390 Resetter Fixed
Let’s compare your options when the Epson 1390 shows the waste ink error:
A quick note: Using the Adjustment Program voids your warranty if the printer is still covered. However, most Epson 1390 units are over a decade old. The warranty is long gone. adjustment program epson 1390 resetter fixed
If your printer is acting up, look for these specific signs:
A "fixed" version resolves these issues, ensuring the resetter actually connects to your USB port and resets the counter on the first try.
Disclaimer: This article is for educational purposes. Resetting the waste ink counter voids your manufacturer warranty (though your printer is likely long out of warranty). Always dispose of waste ink according to local environmental regulations. The program's primary use is to initialize (reset
Unscrew the waste pad housing from the rear/bottom of the printer. Remove the foam pads, wash them thoroughly in warm water, dry them completely, and reinstall them.
