Even if the file extension is .txt , the internal structure is XML. Always open it with a proper XML or code editor (Notepad++, VS Code, Sublime Text), not Microsoft Word.
Once loaded, the tool will automatically fill out a checklist of partition rows (PRELOADER, BOOT, RECOVERY, SYSTEM, etc.) with their corresponding image file paths. 4. Select the Flashing Mode In the drop-down menu, choose the correct flashing mode:
For modern 64-bit devices utilizing the XML format, engineers use the alongside a raw hardware readback memory dump file ( ROM_0 ) extracted via SP Flash Tool.
: Like the older scatter files, the XML file acts as a "map" that tells the SP Flash Tool exactly where each part of the firmware (like the boot, recovery, or system images) should be written in the device's physical memory. xml file for sp flash tool
In this guide, we will demystify the XML file, explain why it is crucial for SP Flash Tool, and provide a step-by-step tutorial on how to use it.
: Power off the device and connect it via USB. The tool uses MediaTek VCOM Drivers to establish a connection. Common Errors :
Save the generated XML map directly into your firmware preparation folder. Step-by-Step: Flashing Firmware Using an XML File Even if the file extension is
You cannot download a scatter file in isolation from a generic database. It is for your exact device model and variant.
Identifying the specific areas of storage (e.g., system, boot, userdata).
Open the flash_tool.exe application. You will see the main interface. In this guide, we will demystify the XML
Navigate to the partition tab and select .
Replaces only the selected partitions. Keeps your IMEI and data intact. (Highly Recommended).
For (and newer), the traditional text-based scatter.txt file has been replaced by the flash.xml file. This XML file acts as a configuration map that tells the tool which partitions to flash and where they are located in the device's memory. Key Components of the XML File
For the standard flashing process, you almost always select the file named scatter file (usually ending in .txt but formatted in XML syntax).