Orcad 16.6 Tutorial !!top!!

Differential pairs (e.g., for USB, HDMI, Ethernet) require matched lengths and controlled impedance.

By following this flow—Capture, Netlist, Layout, and Artwork—you can harness the full power of OrCAD 16.6 to bring your electronic designs to life. To help you move forward with your design:

Used for designing the physical PCB board. 2. Setting Up Your First Project Before drawing, you must define your project structure. Launch OrCAD Capture 16.6. Go to File > New > Project . orcad 16.6 tutorial

Getting Started with OrCAD 16.6: A Complete PCB Design Guide

After the simulation is complete, you can view the results in the window. Click on View > Waveform to open the Waveform window. Differential pairs (e

Keep the default parameters and click to generate the CNC drilling coordinate files ( .drl ).

This comprehensive guide covers everything you need to create a complete, production-ready PCB using OrCAD Capture and OrCAD PCB Editor 16.6. 1. Setting Up Your Project in OrCAD Capture Go to File > New > Project

Click to place anchor points and change routing direction. OrCAD automatically enforces 45-degree angles by default.

In the Part Search window, type the component name (e.g., RES for resistor, CAP for capacitor). If the library is not listed, click . Select the part and click Place . Wiring the Components Click the Place Wire icon (shortcut: W ). Click on the component pins to connect them. Adding Power and Ground

Under the domain, set your minimum and preferred line (track) widths.

Go to . Under the Design tab, set your working units (Mils or Millimeters) and sheet size.